CAMWorks For Solid Edge

Yes folks it is finally time to talk about this program and not have to hold anything back. Formally announced today CAMWorks For Solid Edge will be the first truly integrated CAM program for Solid Edge. The question has been posed many times why NX Cam Express  (NX CE) could not be ported to Solid Edge. Quite simply NX CE is design to work inside of NX and to accomplish that has to be capable of opening legacy files from way back in NX and work on them.   Solid Edge files could be imported into NX CE but they had to then be translated into a version of NX Cad to work right.  There was and is no way to take and make Solid Edge directly and truly integrated under these conditions so the search began for an integration partner.  Siemens owns it all by the way so the idea that NX did not want to port NX CE to Solid Edge because it would cost “them” profit is not valid. It was for technical reasons only.

A truly  integrated CAD and CAM program  brings efficiencies to the manufacturing world that can’t be accomplished any other way. One mouse click to get to Solid Edge and one mouse click to get back to CAMWorks For Solid Edge. Right there in the same environment and on the same “page”.  It is the only way to go if you can. I am pretty sure every reader of this post understands the power here so I am not going to dwell on this.

The criteria to be met once NX CE was ruled out was to find a company that had solid knowledge of CAM with proven products and a track record of success with integration.  Along the way it became more complicated when HSMWorks was bought out. Now it became imperative that the partner company not only be qualified but also not  be in danger of being bought out from under Siemens feet as HSMWorks was with Solid Works.  Siemens works in ten-year planning periods and they had to be sure that their partner choice was also committed to this ten-year planning period too. Not only do they want to know where they will be in ten years they want their customers to know. Stable rational management planning capabilities both in Siemens and with their customers is predicated on knowing what your tools will be so you can make plans accordingly.

There is something like fifty or so differing CAM programs I have been told and when the search began it was a little daunting for the Siemens SE integration guys who had no idea the CAM market was this populated. They were used to CAD and that market is nowhere near as fragmented. However when you start tire kicking a bunch of them fall to the side quickly for a variety of reasons.

Geometric’s CAMWorks was the final pick and became the integration partner. I have had the privilege (Such as being a beat tester is as those of you who have been there know!) of being a beta tester for CWFSE (CAMWorks for Solid Edge). Now understand that we did not have the Beta to play with until three weeks ago and I did not actually cut parts with it until Wednesday through Saturday last week. As a result it is hard for me to sit here and try to answer questions other than in generalities. I do feel qualified to do that however.

CWFSE is not a simple CAM program and there is not a simple one out there however that can do all the things CWFSE does. This is the price to pay for having a powerful program at your fingertips.  Automatic Feature Recognition like that found in CWFSE  is a very powerful tool that is in many ways the CAM equivalent to the Synchronous Tech capabilities in Solid Edge. To make it work right you have to properly set up your tool crib. Once this is done AFR is quite powerful and in many cases will automatically yield tool paths that will need little tweaking to completely cut a part. For those of us like myself who still like to work off of features I pick Individual Feature Recognition is a great tool. Plus you can get  Volumill with CWFSE and the metal removal capabilities there are nothing less than phenomenal. We were looking up recommended speeds and feeds from the Volumill Milling Advisor and were a little timid to take their word for things at first. Cutting 4142 with a .5″ five flute end mill at 1″ depth with a 7% step over at 287 IPM is not something I have done before.  I am counting dollar signs for the future as I contemplate the increased efficiencies CWFSE and Volumill will be bringing to this shop.

In any case there will be a far more about CWFSE in the near future as this new program is put through  its paces.  I am just VERY pleased to be sitting here at SEU2013 today and see the culmination of CAM integration finally happen for Solid Edge. This is extremely important to Solid Edge considering the fact that  design software has no reason to exist without a product being produced somewhere at some time from it.

Solid Edge is now a complete manufacturing environment. I prefer to think it is the best midrange MCAD/CAM  manufacturing environment out there. There is a synergism that exists here with Solid Edge’s direct editing capabilities with Synchronous Tech and the Automatic Feature Recognition when set up with CWFSE and run in conjunction with Volumill.  OK, I admit I am biased and opinionated here about this. But I have good reason to be and I don’t see anyone else out there with this power to deliver productivity to shops that actually make things. And as a big bonus feature I know where Siemens is taking us in the future and it is to better productivity tools and no cloud type junk.  Their feet are firmly planted on the same ground I have to walk on and their manufacturing considerations are the same as mine because they are using it in their own manufacturing ecosystem.  Practical solutions and planning for real problems we all encounter and I can’t ask for anything better.

Now all you guys over at the Siemens  BBS SE Misc category know what “Quiffsee” is 🙂

CAMWorks For Solid Edge open window

6 responses to “CAMWorks For Solid Edge

  1. Great news. Any idea on shipping dates, pricing, or bundling? Will CWFSE be like HSMXpress in that it is a free add on to SE? Need more beta testers?

    • I think in around a month and what I have been told is at the same time as ST6 is released. They don’t ever give an exact day just an approximate time frame. There will not be a free crippled version of CWFSE like HSMXpress as far as I know and I don’t really think they have decided what introductory pricing will be nor permanent pricing and I can’t get anyone to talk about numbers yet. Beta testers were chosen some time back and there will be no more added so you are out of luck there.

      The HSMXpress was a very good deal for those who did not need 3 axis. After all how can you beat free. It reminds me of what Surfcam did back in 2001 with 2D Free and it went for about 1.75 years before they decided that whatever they had hoped to achieve was done. Then we got the email and an offer to “upgrade” to a paying seat or let it bite the dust. I figure this will be the HSM model too so HSM users enjoy it while you can. Good and free are not forever and I figure this was started because HSM was in financial trouble and needed something to drive new customers. I wonder if Autodesk continues it because they have promised not to change things and probably won’t until it is fully ported to Inventor. Then the push will be on to convert all the SW guys to Inventor and HSMXpresses days will be numbered.

      What are you using for CAD?

  2. This is big news and an important move for the industry as a whole.
    Looking forward to hearing and seeing more about it.

  3. Dave, it looks like Mark and team have done a great job developing the SE ecosystem. They could so have easily got the CAM vendor wrong but I believe they have shown great judgment.
    I look forward to your future posts you start running real jobs.

  4. Dave, a good explanation of why NX CAM wasn’t put into Solid Edge. Some people just don’t get that there is no extraneous CAM program attached to NX, but rather it IS NX and so you would pretty much have to start over if you tried to put it into Solid Edge.

    I’m anxiously waiting for Wire EDM capabilities in a future release of CW4SE.

  5. Hi Ken,
    Yeah I know some people just don’t get it. The information why this can’t be done has been covered but some persist in thinking they know better than the programmers who write the stuff 😉 Either NX or SE would have to be fundamentally changed and for what purpose when a program like CW4SE which is quite capable can be integrated instead.
    Wire EDM will be later this year. I am told that there will be a pretty major update come quickly to fill in the capabilities not there right now like mill turn and wire.

Leave a Reply to Jason Cancel reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s