I was reading the Novedge aggregation today and was reminded how things can change. It is hard to imagine that at this time four years ago when SW World 2012 was going on it was with amusement I regarded SW user futures. Idiots with Dassault were frothing about the cloud and producing vaporware after vaporware and boasting of those achievements. It was quite amusing. Over on the SE side of things we had rapid product improvements of tremendous utilitarian value. Leadership committed to positive changes and the Universities looked like they were going to grow to big events in short order.
At that time Autodesk was not on my radar and quite frankly I did not seek much information on them. I had seen a few examples of Inventor work and users. Without fail when I took their models and edited them in front of them with SE easier and faster than they could and the old eyes bugging out thing invariably happened. To me Autodesk was a company that did not much register and the chief competitor to #1 which I believed SE deserved was SW not Inventor.
As an aside here. Inventor does not offend me as much as it used to. But I still find way to many complications to simple part creation compared to the purely Synchronous editing and part creation I by choice have been using for some time now. With SE for instance I can draw a circle on the end of a cylinder and when I click on it extrude remove on either side of the circle and darned if I could find a way to do it in Inventor this weekend. It may be there but even if it is why are the methods of doing so hard to find or convoluted? In SE you click on it and straight forward simple intuitive commands pop up. Some of the issue is me not spending the time to learn Inventor and some of it is the weird or counter intuitive way Inventor wants me to work that prevents my desire to want to learn. I have yet to decide which is the bigger problem. HSM which was not configured by the people who decided how Inventor was to work is so well thought out and logical it reminds me of SE on steroids. So I lean towards some cubical guys who wrote code for a living and did not design parts for a living being the problem and not me. Anyway.
So SW World 2016 is here and hardly any bloggers talk about it. The few that do most are employed in one way or another by either Dassault or VAR’s selling Dassault and most of the true independent bloggers who were there because they loved what they used to earn a living with are long gone. People like Devon Sowell and Matt Lombard who were passionate and independent have either quit in disgust or been subsumed into the belly of one beast or another. SW has alienated most of those with passion and love of the product who were willing to talk well of them or indeed at all. SEU comes and goes and the same thing. You who have been readers for years think back about how it used to be and Novedge was cluttered with commentaries from “fanbois”.
Autodesk as far as I can tell is the same and the blogs I have run across so far most are all affiliated with VAR’s or Autodesk. By the way, any blogger who is not or even if you are I guess send me a link to your site and I will have a look. I am searching for sites of interest to provide links to. But my main point is that the whole CAD industry has largely alienated itself from users who were willing to spend uncompensated time on their own to talk about something they felt passionately about. Through stupid things like Dassaults desire to kill this SW thing they can’t quite figure out how to stab to death yet without causing undue harm to themselves. Through the stupidity of Siemens UGS taking SE a killer design product with a future and instead of making it so smashing it into obscurity once again because some political back stabbers from UGS just don’t happen to like it.
Now we have Autodesk trying to force users to be chattel subscribers only and long time passionate CAD CAM users hate that kind of corporate money-grubbing suppression and so this great forward-looking thing Autodesk was a short time ago becomes just another neccessary evil to people who don’t have permanent seats but still have to use these tools to earn a living with. Of the three major software companies out there I ever run into I still hold out hope for Autodesk to change its mind as being the last great hope for forward-looking design build software that would acknowledge that the success of its users is just as important as the authoring company. ProE who? No comment as I just never run into anyone or any file from them. I know they are out there and that is it.
Quite frankly I think the whole face of CAD CAM is changing and not for the better. My last big hope is that somehow Autodesk recants from their book-keeper chattel model and goes back to offering seats and subs for whomever and letting the buyer be the chooser as to what is picked.
Is it not amazing the difference between SW and SE? One company driven by a visionary multi-year plan dedicated to the idea of growth and community and utilizing the two to work together toward a common goal of market domination. Look at SE which has been around just as long and as far as I am concerned is superior for 90%+ of all MCAD over SW. Relegated to sucking hind teat forever by capital venture company flipping people or ignorant individuals afraid of competition who happen to work however for the same corporation. Siemens is too bureaucratically ossified to be able to fight counter productive things so these guys who sabotage overall corporate profitability get away with it. But look at SW! In spite of internal Dassault interference it still reigns supreme and it is a huge testimony to those who drove SW for so long before Parisians decide to “improve” upon it.
Hats off to SW today for the legacy it has. They have earned it and I wish the users the best and hope it all works out to their benefit.
Update today 2-1-16
Entering into the first full week of the end of new permanent seats for Inventor Pro HSM we have an announcement from Dassault SWW 2016 today that there will be no end to permanent seats for SW. I have no idea how this is going to work with HSMWorks for new customers. At this time Delcam products still offer permanent seats and talking to a sales rep last week Autodesk has no intention of ending this. Solid Edge of course is offering permanent seats along with rental, you choose.
Personally speaking I think someone(s) somewhere inside of Autodesk started a policy that will backfire. One has to remember though something I learned first hand when I knew Karsten Newbury. The person in charge does not have free will to just do whatever they want. There are conflicting opinions and agendas and back stabbers and people of authority who will oppose you for whatever reason. I am certain the same is true for Carl Bass. What I am hoping is that this has been allowed to go on because opposing it would have meant fighting a big chunk of mercenary upper management that does not understand buyers can and will buy from others if you force them to. You do NOT own them. This whole chattel serfdom thing is not the same philosophy I perceive as coming from Bass who has spent so much time assembling a manufacturing ecosphere and is himself a chip maker. I think a turf war was big enough that he was forced into saying OK. But my hope is that he is standing there with a pink slip in hand once these plantation owners are proven wrong and out the door they do. Gonna be real hard to make this stick when your major opposition is going to shoot you down through the concept of customers are first.