Tag Archives: Autodesk Fusion 360

This is the third and final part of the Autodesk And The Future commentary.

I have had to think a while for what exactly should be said about the direction Autodesk has taken. Keep in mind I believe that until forever has passed any existing policy can be changed including the wretched subscription model being foisted on future commercial users who are silly enough to go there. Will they change it without serious decline in income? No and if enough foolish individuals fund them and they think they can prevail with this plantation creating model they will keep going this way. It is all up to the buyers to stop it.

But there is a second group that does not need security, at least not yet. They will in time seek security when they get hacked or someone they know does. Or after depending on cloud backups with no internal self backups created they lose their data. Or for any number of reasons many of which have been talked to death. You either get it or you don’t and the world you live in will treat you accordingly. Funny how people who start generating real wealth begin to worry about protecting it to. This is the future for many of the current adopters of Fusion360.

The greatest fallacy of the existing current educational system is the self promoted idea that a college degree guarantees success. No matter how irrelevant the degree earned is to the real world. Promoted by huge lobbies that buy political favor and then reward themselves with wages (in particular at universities) way beyond their true real world worth. So these kids swallow the promise and get to go someplace cool and hang out with cool people for a while. Spend lots of money they had to borrow to be there and thus create their first real world scenario. Debt that has to be paid back.

Then they find out these educators who are tied into the same group that floods the USA with H-1B and other visas had no intention of using them long-term. The same group that trains CPA’s and MBA’s to send jobs overseas to save money and make better profits at the expense of the future. That world which then lives in rigging numbers for quarterly reports and not the future of the country as a whole. So out of school saddled with debt, brainwashed and then fired as they are forced to train their foreign replacement or the job is shipped overseas. Now they have a bright future as the produce head at the local Walmart and since their training was in a specific field most are mentally tied to that for life. Unless they are willing to walk away from it all and the vast majority will not be.

The system is rigged against these people. But having said all this I get to where I want to be.

The most striking thing I have observed with the adopters of Fusion360 is future proofing. I know these kids have no clue of how profound their choices are for their future. They see cool and cheap and making things. Yes Fusion is not as good as real established long-term CAD. But you know what? It is good enough to do almost everything I have done to date for a living insofar as design goes. I base this upon work I have seen done with it and not hands on yet. I am curious enough about it to seriously consider getting a subscription though. Well make that I am getting a  subscription later this year when I dump sad sack Hagerman as my VAR. It will not replace my true CAD backbone which is on site and offline and has permanent licenses. But it will augment my capabilities in ways I will in time be discussing.

Kids who have not had prior experience see things a bit differently. One of the surprising things I have noted is the desire to create a business and to be independent in doing so in the young people I have seen involved with Fusion. It is not a toy and they can make real life parts. With a Tormach mill and Fusion360 (and to a lesser degree Inventor) which is free for most of them. http://www.autodesk.com/products/fusion-360/try-buy. All of a sudden a real business is created for under $10,000.00 which these guys can do. What they can’t do is $7,000.00 for the mill and then $4,000.00+ for cad and then another $10,000.00 for 3 axis mill. What I am talking about is the creation of a future group of people who are being taught to be independent minded and forward-looking. Who are being taught to be creators of things and ideas instead of being formatted by educators whose only real concern is their own wages. Educators who then send them forth with knowledge and no idea of how to adapt to change it if things don’t go quite right. No not all educators but sadly huge numbers of them today do not care one bit about the success of their products, namely the future of their graduates.

Manufacturing has to return to America in a big way in order for us to survive as we have known life to be to also be so in the future. We have to be innovators and creators and makers. These Fusion guys are just that and even though many of the products I have seen are crude and simple they do exist and these kids ARE learning to put in place the whole mental process of stepping outside a rigid mindset and into one where the question is asked what can I think up to do. Unlike those with formal education who so often look for ways to save their time and money spent to get an education in the same field of endeavor they were trained in. The idea of throwing it all away and starting over is admitting defeat most will not want to acknowledge. So they slog on flogging a dead horse and train yet more H-1B visa replacements.

What the Fusion guys are learning is that if one thing does not work another will. That with tools of creation and cheap price of entry you can experiment until you find the right things to profit by. They are learning that the only limits that should apply are the ones you put on yourself outside of your own innate abilities mentally. Some people become Henry Ford or Bill Gates others peak at just providing a decent living for themselves. But they are learning how to survive and indeed thrive no matter what the economy does because they can adapt quickly to changing circumstances. It boils down to what can I do and not what have they trained me to do or waiting for someone to tell them what to do. The price tag of failure is not so high when the tools for creation and manufacturing can be applied to so many diverse things and merely stepping sideways allows you to reuse what you have for another idea that will work.

It is this whole mindset I am seeing with this group that fascinates me. It is primarily with Autodesk these young individuals are doing this too since Autodesk has gone farther than anyone else in putting these tools in their hands.

So, the second pathway is how to think and create and rise above limitations through developing an independent what can I do for myself attitude. In other words they become makers and free themselves from limits most people impose upon themselves. Lets face it the vast majority of people are terrified of working for themselves and being responsible for their own futures.

I remember when I left Chrysler how this was proven to me. I had been there for 8.5 years and by 1981 it took 13.5 years seniority just to have a job with Chrysler. Out of all the people I knew there only three did not sit on their fat buts and wait the two years out so Chrysler could call them back into their coccoon. One was a lady who went into Radio Shack to work with computers just as the industry was really getting started. One was an idiot who did not want to pay his wife alimony and the other was me. The common refrain was you have too much time in here to walk away from it all.  But these same people would speak in reverence of the tiny group of individuals who HAD left over the years and started businesses. Envy but no desire or ability to have to fend truly for themselves based upon their own desires and abilities.

Fusion is I think creating more than any other product outside of Autodesk a group of people who will be business owners and not business employees. Who will be making opportunities instead of hoping for a raise. Who will be at times perhaps temporarily affected by adverse economic problems but not see it all come crashing down around them. Who before the hands of traditional ways of earning a living got a vice grip upon their minds learned instead to step outside of the box and fend for themselves.