For those of you who are early adopters or have support tickets which you are waiting to have fixed go have a look.
will take you to your flavor of CAM. I have been through five of these updates now and have not experienced any problems.
http://camforum.autodesk.com/ will take you to the Autodesk CAM forums where you can see if there are any issues for these in quick order as there are a number of early adopters and they are not bashful.
In any case it good to see the regularity of fixes and coming from the world of CAMWorks it’s quite a refreshing change. You might also go and have a look even if you are not a customer just to see what the community is like. The fact that all is open to see for better or worse is a clear indication of the confidence they have in their products.
Look for a video this week on a 3 axis part being cut for food service. I am achieving without trouble a finish that requires no hand blending or polishing to go straight into food production with the Scallop 3axis tool path. Life is good when things go right and you don’t have to wrestle with software to make it work. Much nicer to have a tool that does not require Hulk Hogan to be your friend.